==================================== crds98 ==================================== Hh : Antenna fault (14:16-14:25). Ww : No emails. No log. No problems found for : Ho, Ke, Yg ================================ crds98hh READY ================================ 2018-09-26 17:14:25 crds98, HartRAO, Ready-message Session crds98 ready message for HartRAO. ----------------------------------------- Comments: HartRAO is ready to start the experiment. First source: 0107-610 at 17:30:00 UT FMOUT-GPS: 7.3822 microseconds Wx: Temperature (C): 23.5 Pressure (mBar): 862.9 Humidity (%): 24.8 Sky Conditions: clear skies Cable difference is: longer cable makes the reading smaller by 1025.8 microseconds and is nominal Pointing values: na Tsys (x1/s/x2): 56.4/42.8/50.7 ================================ crds98hh START ================================ 2018-09-26 17:30:00 crds98, HartRAO, Autostart-message Session crds98 auto-start message for HartRAO. ---------------------------------------------- Started recording with source: 0107-610 at 269.17:30:00 UT ================================ crds98hh STOP ================================= 2018-09-27 17:22:47 crds98, HartRAO, Stop-message Session crds98 stop message for HartRAO. ---------------------------------------- Comments: HartRAO has completed the experiment CRDS98. Clear sky when the experiment started. 70-80% cloud cover midway Clear sky at the end of the experiment Data will be e-shipped to Washington Problem scans: Source Scan start Explanation of problem 1725-795 14:16:32 ANTCN 'fault' 1815-553 14:22:47 ANTCN 'fault' Disk Inventory: A 0, B 0, C 0, D 0, E 0, F 0, G 2, H 0, (other larger) 4 Observation finished at: 17:22:20 UT ================================ crds98ho WIKI ================================= 2018-10-01 23:09:00 crds98 Hobart 26m Disk VSN: HOB-0106/16000 | Data volume at beginning: 0.00 GB CRDS98 was unable to be slogged. This seems to be due to the schedule coming in vex format. on newsmerd: wget ftp://cddis.gsfc.nasa.gov/vlbi/ivsdata/aux/2018/crds98/crds98.vex to download then cp to /vlbobs/lba/crds98/ on newsmerd (make directory [mkdir /vlbobs/lba/crds98] if it does not exist) For hobart26m drudg, from ~/ on newsmerd, run slogit.lba.v4.sh OR slogit.lba.v3.sh Look at the vex file, if it contains HOBART or HOBART26 as the station name (most likely) then v4. If is is HOB_DBBC or HOB_MK5 run v3. Do not download new file . vex must be in (e.g) /vlbobs/lba/crds98/ For ke and yg, run slogit.lbake.sh etc . Receiver was stuck slightly (~40 mm in x/y) off S/X. Moved to K-band [22GHz, number 8] receiver which is closest (see http://ra-wiki.phys.utas.edu.au/index.php?n=MtPleasant26m.ReceiverPositionsAndSystemTemperatures ) then back to S/X [1] and this seemed to work. Got error from mk5=dot? Dot clock/mode not set? Decided to power cycle mk5hb and restart dimino with ./dim crds98ho. This worked and resolved the error and another error about NTP error. 269.17:30:00 Experiment started okay (Lucas). Looks like hobart fs needs reboot, ERROR sc -8 setcl less than 30 days before time error, reboot as soon as possible. (Lucas). Almost all system temperature readings bad. Correct BBCs, rxp and LO. ================================ crds98ke WIKI ================================= 2018-10-01 23:09:00 crds98 Katherine 12m Disk VSN: HOB+0042/16000 | Data volume at beginning: 0.00 GB 269.17:30:00 Experiment started okay (Lucas). ================================ crds98yg WIKI ================================= 2018-10-01 23:09:00 crds98 Yarragadee 12m Disk VSN: GSFC+0180/8000 | Data volume at beginning: 0.00 GB 269.17:30:00 Experiment started okay (Lucas). ================================================================================