Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 3945600 
Found #42 errors of type = ERROR st   -7 Antenna off-source! 
Found #6 errors of type = ERROR st   -4 Interface not set to remote. 
Found #6 errors of type = ERROR st   -6 Antenna control restored. 
Found #2 errors of type = ERROR st -823 sxcheck sup is 226.615. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 219.287. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 228.080. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 224.660. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st   -5 Error return from antenna. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 228.569. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device ia overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 220.264. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 216.356. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5h -302 background Mark 5 error(s) detected - see below 
Found #1 errors of type = ERROR st -823 sxcheck sup is 213.425. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 225.638. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 332.135. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 227.592. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5k  302 There have not been two scan_name ... commands since the schedule started  use scan_check force to force check 
Found #1 errors of type = ERROR st -823 sxcheck sup is 221.241. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.86 max= 3.92
RX2 min= 4.71 max= 4.85
RX3 min= 246.16 max= 264.72
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= ohg113kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 69.9 126.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 70.3 ymax 134.4 
in match_chan ft1= ohg113kk.log.tsy1.ntup nt1= 12 st1= 5u tt= 1
set scale tsys1 [2] min max 69.9 126.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 58.8 ymax 116.5 
in match_chan ft1= ohg113kk.log.tsy1.ntup nt1= 18 st1= 9u tt= 1
set scale tsys1 [2] min max 69.9 126.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 28 ymax 54.8