Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 230400 
Found #57 errors of type = ERROR st   -7 Antenna off-source! 
Found #29 errors of type = ERROR st -829 sxcheck 15k is 20.518. (should be 5.000 to 20.000) 
Found #20 errors of type = ERROR st -829 sxcheck 15k is 20.029. (should be 5.000 to 20.000) 
Found #11 errors of type = ERROR st   -4 Interface not set to remote. 
Found #8 errors of type = ERROR st -829 sxcheck 15k is 21.006. (should be 5.000 to 20.000) 
Found #8 errors of type = ERROR st   -6 Antenna control restored. 
Found #5 errors of type = ERROR st -823 sxcheck sup is 224.231. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR st -823 sxcheck sup is 228.627. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR st -823 sxcheck sup is 221.788. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 229.116. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 222.277. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 225.208. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 212.506. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 224.719. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 220.322. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 195.896. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 210.552. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 200.782. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 219.345. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 187.592. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 203.224. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.254. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 184.172. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 210.064. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 218.857. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 217.391. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5k  302 There have not been two scan_name ... commands since the schedule started  use scan_check force to force check 
Found #1 errors of type = ERROR ch -212 be LO unlocked. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.742. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 215.926. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR ch -208 bb gain mode does not check with requested setting 
Found #1 errors of type = ERROR st -823 sxcheck sup is 227.650. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 227.162. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 225.696. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 211.529. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR ch -212 b8 LO unlocked. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 182.706. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 220.811. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.85 max= 3.92
RX2 min= 4.70 max= 4.83
RX3 min= 218.37 max= 251.59
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1823kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 78.7 99.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 74.8 ymax 104.5 
in match_chan ft1= r1823kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 78.7 99.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.7 ymax 71.7 
in match_chan ft1= r1823kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 78.7 99.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 20.5 ymax 59.7