Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 1958400 
Found #1614 errors of type = ERROR st -828 sxcheck 50k is 105.520. (should be 20.000 to 105.000) 
Found #214 errors of type = ERROR st -828 sxcheck 50k is 105.032. (should be 20.000 to 105.000) 
Found #148 errors of type = ERROR st -828 sxcheck 50k is 106.009. (should be 20.000 to 105.000) 
Found #15 errors of type = ERROR st   -7 Antenna off-source! 
Found #10 errors of type = ERROR st   -4 Interface not set to remote. 
Found #8 errors of type = ERROR st   -6 Antenna control restored. 
Found #2 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or was less than zero. 
Found #2 errors of type = ERROR st -824 sxcheck ret is 39.570. (should be 40.000 to 90.000) 
Found #2 errors of type = ERROR st -824 sxcheck ret is 36.150. (should be 40.000 to 90.000) 
Found #1 errors of type = ERROR m5 -104 mk5cn: time-out  connection closed 
Found #1 errors of type = ERROR st -823 sxcheck sup is 342.452. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR mc   -2 Interface b2 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR ch -208 b2 gain mode does not check with requested setting 
Found #1 errors of type = ERROR ch -208 bc gain mode does not check with requested setting 
Found #1 errors of type = ERROR st -824 sxcheck ret is 39.082. (should be 40.000 to 90.000) 
Found #1 errors of type = ERROR mc   -2 Interface bc responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR 5h -302 background Mark 5 error(s) detected - see below 
Found #1 errors of type = ERROR st -823 sxcheck sup is 225.696. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device au overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 217.391. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 321.446. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 224.231. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5k  302 There have not been two scan_name ... commands since the schedule started  use scan_check force to force check 
Found #1 errors of type = ERROR st -823 sxcheck sup is 319.003. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR mc   -2 Interface be responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 347.826. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 229.116. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.83 max= 3.91
RX2 min= 4.67 max= 4.81
RX3 min= 257.94 max= 275.04
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1826kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 3.9 95.5
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 72.7 ymax 127 
in match_chan ft1= r1826kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 3.9 95.5
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 44.3 ymax 68.6 
in match_chan ft1= r1826kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 3.9 95.5
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 12 ymax 305