Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 414000 
Found #48 errors of type = ERROR st   -7 Antenna off-source! 
Found #12 errors of type = ERROR st -829 sxcheck 15k is 20.518. (should be 5.000 to 20.000) 
Found #6 errors of type = ERROR st -823 sxcheck sup is 229.116. (should be 230.000 to 315.000) 
Found #5 errors of type = ERROR st   -4 Interface not set to remote. 
Found #5 errors of type = ERROR st -829 sxcheck 15k is 21.495. (should be 5.000 to 20.000) 
Found #5 errors of type = ERROR st -829 sxcheck 15k is 21.006. (should be 5.000 to 20.000) 
Found #5 errors of type = ERROR st   -6 Antenna control restored. 
Found #4 errors of type = ERROR st -829 sxcheck 15k is 20.029. (should be 5.000 to 20.000) 
Found #4 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #4 errors of type = ERROR st -823 sxcheck sup is 228.139. (should be 230.000 to 315.000) 
Found #4 errors of type = ERROR st -823 sxcheck sup is 224.231. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR st -823 sxcheck sup is 214.460. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR st -823 sxcheck sup is 226.185. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR st -823 sxcheck sup is 228.627. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 229.604. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR sp   -3 More than 12 characters in function or procedure name. 
Found #2 errors of type = ERROR st -823 sxcheck sup is 216.414. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 215.926. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR st -823 sxcheck sup is 227.162. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #1 errors of type = ERROR st -823 sxcheck sup is 220.322. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 183.195. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 211.041. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR mc   -2 Interface bd responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 219.345. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 200.782. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 203.224. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.254. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 221.788. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR ch -212 be LO unlocked. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 189.546. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.742. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 213.483. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 214.949. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 222.765. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 227.650. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 225.208. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 225.696. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 211.529. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 226.673. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.83 max= 3.93
RX2 min= 4.67 max= 4.85
RX3 min= 222.77 max= 256.47
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r4823kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 78.9 101.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 73.9 ymax 111 
in match_chan ft1= r4823kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 78.9 101.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.5 ymax 72.7 
in match_chan ft1= r4823kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 78.9 101.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 26 ymax 305