Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 1018800 
Found #45 errors of type = ERROR st   -7 Antenna off-source! 
Found #14 errors of type = ERROR st -823 sxcheck sup is 229.604. (should be 230.000 to 315.000) 
Found #9 errors of type = ERROR st -823 sxcheck sup is 228.139. (should be 230.000 to 315.000) 
Found #8 errors of type = ERROR st -823 sxcheck sup is 229.116. (should be 230.000 to 315.000) 
Found #7 errors of type = ERROR st -823 sxcheck sup is 228.627. (should be 230.000 to 315.000) 
Found #5 errors of type = ERROR st   -4 Interface not set to remote. 
Found #5 errors of type = ERROR st -823 sxcheck sup is 226.673. (should be 230.000 to 315.000) 
Found #5 errors of type = ERROR st   -6 Antenna control restored. 
Found #4 errors of type = ERROR st -823 sxcheck sup is 226.185. (should be 230.000 to 315.000) 
Found #4 errors of type = ERROR st -823 sxcheck sup is 227.650. (should be 230.000 to 315.000) 
Found #4 errors of type = ERROR st -823 sxcheck sup is 227.162. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR st -823 sxcheck sup is 225.208. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR st -823 sxcheck sup is 225.696. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 223.254. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 221.788. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 213.483. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR st -823 sxcheck sup is 224.231. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #1 errors of type = ERROR st -823 sxcheck sup is 199.805. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 224.719. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or was less than zero. 
Found #1 errors of type = ERROR ch -208 bc gain mode does not check with requested setting 
Found #1 errors of type = ERROR st -823 sxcheck sup is 196.873. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 212.018. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 212.995. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 207.132. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 203.224. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 187.103. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 204.201. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 219.834. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 208.598. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 216.414. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.742. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 215.926. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device eu overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 204.690. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 222.277. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 206.644. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -824 sxcheck ret is 90.865. (should be 40.000 to 90.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 202.247. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 214.949. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 201.759. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 216.903. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR mc   -2 Interface bc responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR st -823 sxcheck sup is 205.667. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 218.368. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 194.919. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device au overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 157.303. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 220.811. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.83 max= 3.89
RX2 min= 4.67 max= 4.78
RX3 min= 228.63 max= 250.61
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r4824kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 80.6 101.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 75.5 ymax 107.7 
in match_chan ft1= r4824kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 80.6 101.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.8 ymax 73.9 
in match_chan ft1= r4824kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 80.6 101.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 27.7 ymax 305