Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 3438000 
Found #31 errors of type = ERROR st   -7 Antenna off-source! 
Found #2 errors of type = ERROR st -823 sxcheck sup is 226.615. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 229.546. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR qk -211 Tsys value for device bu overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 209.516. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 211.959. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st   -4 Interface not set to remote. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 228.569. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 209.028. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5h -302 background Mark 5 error(s) detected - see below 
Found #1 errors of type = ERROR st -825 sxcheck refrg is 0.261. (should be 0.300 to 0.800) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 225.638. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 315.037. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 318.456. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 212.447. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 224.660. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -824 sxcheck ret is 91.842. (should be 40.000 to 90.000) 
Found #1 errors of type = ERROR st   -6 Antenna control restored. 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.90 max= 3.95
RX2 min= 4.81 max= 4.90
RX3 min= 242.25 max= 262.28
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r4828kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 73.9 105.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 69.4 ymax 108.4 
in match_chan ft1= r4828kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 73.9 105.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 41.4 ymax 75.2 
in match_chan ft1= r4828kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 73.9 105.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 6.8 ymax 305