Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 5252400 
Found #25 errors of type = ERROR st   -7 Antenna off-source! 
Found #6 errors of type = ERROR st   -4 Interface not set to remote. 
Found #6 errors of type = ERROR st   -6 Antenna control restored. 
Found #5 errors of type = ERROR st -816 sxcheck tbox is 30.371. (should be 17.000 to 30.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 229.057. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 214.890. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 212.447. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 227.592. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.195. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 213.425. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 319.433. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or was less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device eu overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 210.982. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 208.051. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device au overflowed or was less than zero. 
Found #1 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 211.470. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 207.074. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #1 errors of type = ERROR st -824 sxcheck ret is 90.376. (should be 40.000 to 90.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 222.706. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 330.669. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 212.936. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 222.218. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 202.189. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 207.562. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 199.257. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 219.287. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 221.241. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 226.126. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 210.493. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.83 max= 3.89
RX2 min= 4.65 max= 4.76
RX3 min= 238.34 max= 262.77
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r4831kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 74.5 125.9
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 68.3 ymax 127.6 
in match_chan ft1= r4831kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 74.5 125.9
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 41.6 ymax 95.4 
in match_chan ft1= r4831kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 74.5 125.9
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 14.9 ymax 305