Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 925200 
Found #34 errors of type = ERROR st   -7 Antenna off-source! 
Found #22 errors of type = ERROR st -823 sxcheck sup is 228.627. (should be 230.000 to 315.000) 
Found #15 errors of type = ERROR st -823 sxcheck sup is 229.604. (should be 230.000 to 315.000) 
Found #9 errors of type = ERROR st -823 sxcheck sup is 229.116. (should be 230.000 to 315.000) 
Found #6 errors of type = ERROR st -823 sxcheck sup is 226.185. (should be 230.000 to 315.000) 
Found #5 errors of type = ERROR st -823 sxcheck sup is 228.139. (should be 230.000 to 315.000) 
Found #5 errors of type = ERROR st -823 sxcheck sup is 227.162. (should be 230.000 to 315.000) 
Found #5 errors of type = ERROR st -823 sxcheck sup is 226.673. (should be 230.000 to 315.000) 
Found #4 errors of type = ERROR st -823 sxcheck sup is 212.018. (should be 230.000 to 315.000) 
Found #4 errors of type = ERROR st   -4 Interface not set to remote. 
Found #3 errors of type = ERROR st -823 sxcheck sup is 223.254. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR st -823 sxcheck sup is 224.231. (should be 230.000 to 315.000) 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR st   -6 Antenna control restored. 
Found #2 errors of type = ERROR st -823 sxcheck sup is 200.782. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 203.224. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 219.834. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 215.926. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 222.277. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 225.208. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 225.696. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 207.621. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 220.811. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 224.719. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 209.086. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 212.995. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 189.057. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5k  302 There have not been two scan_name ... commands since the schedule started  use scan_check force to force check 
Found #1 errors of type = ERROR st -823 sxcheck sup is 216.414. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 209.575. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 214.949. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 227.650. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 212.506. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5h -302 background Mark 5 error(s) detected - see below 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR st -823 sxcheck sup is 186.126. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 217.880. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 211.529. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 197.851. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 186.615. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.84 max= 3.90
RX2 min= 4.69 max= 4.79
RX3 min= 230.58 max= 249.63
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= rd1801kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 80.9 185.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 75.9 ymax 187.6 
in match_chan ft1= rd1801kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 80.9 185.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.8 ymax 131.3 
in match_chan ft1= rd1801kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 80.9 185.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 26.5 ymax 56.3