Starting generation of Calibration File 
FS version = 0009.0012.0011 
time_zero = 5245200 
Found #16 errors of type = ERROR st   -5 Antenna communication error  see above errors. 
Found #15 errors of type = ERROR st -999 Reply time-out 
Found #15 errors of type = ERROR st   26 ACU-FS Time difference now nominal. 
Found #5 errors of type = ERROR st -998 read ReadGroup 
Found #3 errors of type = ERROR st    6 ACU-FS time difference -252 ms  exceeds 250 ms. 
Found #3 errors of type = ERROR st  -76 Azimuth Slave Brake Alarm on. 
Found #3 errors of type = ERROR st  -72 Elevation (motor) Brake Alarm on. 
Found #3 errors of type = ERROR st  -66 Azimuth Master Brake Alarm on. 
Found #3 errors of type = ERROR st -998 write regs 
Found #3 errors of type = ERROR st -998 write ReadGroup 
Found #3 errors of type = ERROR st  -53 Antenna control timed-out. 
Found #3 errors of type = ERROR st  -77 Elevation Slave Brake Alarm on. 
Found #3 errors of type = ERROR st  -47 Antenna Control Timeout should be enabled but is disabled. 
Found #3 errors of type = ERROR st  -50 Antenna NOT fully moveable  see above errors. 
Found #2 errors of type = ERROR st    6 ACU-FS time difference -264 ms  exceeds 250 ms. 
Found #2 errors of type = ERROR st -998 write timeout reset 
Found #2 errors of type = ERROR 2b -303 IF 1 RMS too low  rdbca 
Found #2 errors of type = ERROR st -998 reading epoch 
Found #2 errors of type = ERROR m6 -104 mk6ca: time-out  connection closed  will reopen on next attempt 
Found #2 errors of type = ERROR st  -24 Antenna not ready  verify condition  start with antenna operate 
Found #2 errors of type = ERROR st    6 ACU-FS time difference -256 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -304 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -258 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -275 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR 2b -304 IF 0 RMS too high  rdbca 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -260 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -283 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -255 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -273 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st -998 reading AzimuthMasterStatus 
Found #1 errors of type = ERROR st  -93 Wait for power-off and drives to trip timed-out. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -319 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st -999 Illegal Data Address exception response 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -328 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -268 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st    6 ACU-FS time difference -270 ms  exceeds 250 ms. 
Found #1 errors of type = ERROR st  -14 Switch to operate and brakes releasing timed-out. 
Found these BBCs:   
NBBC: 0
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 0 Tsys channels:   
NTSYS: 0